Noctua support AMD processors with new coolers such As the NH-U12S and the larger N-U14S has also received the Threadripper treatment – hinted at by a 'TR4-SP3' at the last of the list. This means dynamical outgoing the contact surface of the cooler, to primarily see it is large enough for the much bigger Threadripper IHS, and secondly ensuring the cooler can cover the high TDP from such a CPU. In our testing, the NH-U12S TR4-SP3 performed pretty well which would suggest we can expect even better results from the big New Hampshire-U14S.
It rattling is an intriguing one when it comes to Mary Leontyne Pric vs performance though as the NH-U14S TR4-SP3 is priced at £74.99, only £1.00 Sir Thomas More expensive than the 120mm modeling. With such a small price difference of opinion, is at that place really any reason not to choose the Noctua NH-U14S TR4-SP3?
Watch via our Vimeo channel (downstairs) operating theatre over on YouTube at 2160p HERE
Specification:
- Model: NH-U14S TR4-SP3
- Heat Sink Material: Copper (base and heat-pipes), aluminum (cooling fins)
- Included Fans: Noctua NF-A15 PWM
- Fan Dimensions: 140 x 150 x 25mm
- Fan Speed: 1,500 RPM @100% PWM
- Fan Noise Level: 24.6 dBa @100%
- Fan Connexion: 4-Pin (PWM)
- Guarantee: 6 years
- AMD socket compatibility: AMD TR4
- Heat energy Sink Weight: 865g
- Heat Sink Dimensions (DxWxH) : 52 x 150 x 165 millimeter
- Accessories: Low-Noise Adapter
The NH-U14S TR4-SP3's packaging follows Noctua's typical innovation, a large closeup of the cooler inside, and more or less operative features are listed. First step everything dormie reveals the cooler itself, along with a pretty simple accessories box.
We have a position of instructions, about outflow compound, a depleted make noise adapter, spare telegraph mounts, and rubber anti vibration pads for adding a ordinal fan at a later date.
There are no far mounting parts, or back plates equipped the NH-U14S TR4, as all parts required for mounting are pre-installed happening the cooler itself. The enclosed rooter American Samoa expected is a premium one the Noctua NF-A15 PWM With a max rpm of 1500.
Taking a look at the ice chest information technology is quite a trifle big than the NH-U12S TR4-SP3 coming in at 150mm by 165 by 52mm without the fan installed, and 150mm deep with the fan. In footing of weight 1030g with the fan, jolly serious for a single towboa air cooler.
Being a bit larger, causa compatibility and clearances will come with into play a little more with the NH-U12S TR4 so realistically IT's not departure to be a of import selection for smaller form ingredien builds but the trade-off existence lower temps, and audible resound. It will be interesting to go steady how much this is the case in our testing.
Installation really is super simple. The mounting brackets and mounting screws being built into the cooler means all you need to do, is put on some outflow rough and set the ice chest atop your CPU.
One nice feature which should help with compatibility is showtim mounting built into the coolers mounting bracket. This allows you to adjust the coolers position by 3 or 6mm automotive it up toward the top of your motherboard which increases headway for your top PCIe slot.
It is worth a nimble test fit rightful to ensure there is enough clearance for your cover PCI-e expansion slot, and qualification adjustments to the offset climbing as required. With the cooler nonmoving atop your C.P.U., you can use the enclosed allen cay to drive in it down. With the cooler affixed, you can buoy re-sequester the sports fan.
In terms of clearance for RAM, the ice chest itself doesn't beetle any storage slots, simply the fan does. This means that the buff will have to be installed a itsy-bitsy higher if you are populating all of the store slots.
With Lower visibility memory this isn't really an issue, but you would have to add an extra CM operating theater two to the overall cooler meridian when looking at cases. As the I wasn't exploitation the closest memory slot to the CPU socket, in our testing, the lover could represent mounted in the center of the cooler.
To test all CPU coolers, we devised an well repeatable prove with no variables otherwise the coolers themselves. This ensures that figures from every cooler we test are comparable to each one other.
Test rig
For the Mainframe we are testing with the AMD Ryzen Threadripper 1950X installed in a Gigabyte X399 Aorus Gaming 7 motherboard. For Crash we sustain a 32GB kit of G acquisition flare X linear at 3200Mhz, and storage is handled by a 120GB Samsung 840 EVO SSD. Powering our Bench is a Seasonic Prime Platinum 650W PSU, and just to enable a display output an Nvidia Geforce GTX 980 was also installed.
The test process
For testing, we run a number of tests including 6 separate temperature readings per tank. We first measure the jobless temperature of the 1950X bolted in at 3.4GHz before measuring its temperature under load at the same oftenness.
For a delegacy of overclocks, we discharge the 1950X at 4.5GHz with a core voltage of 1.4V applied both at unengaged and load. The temperatures we present are temperature deltas, where the ambient temperature of the testing environment is deducted from the temperature taken from the CPU for both idle and loading. An idle indication comes from leaving Windows on the desktop for 15 minutes. A lading indication comes from running Prime95's (reading 26.6) Small FFTs test for 15 transactions – enough time for temperatures to tableland. We use HWInfo64 v5.82 to measure temperatures.
Eastern Samoa the 1950X is appropriate more for productivity, passes of both Cinebench R15's Single and Multicore benchmarks were function, besides as Blenders BMW CPU bench mark to break a better idea of temperatures during typical use.
Noise output
We measure noise levels with our sound meter positioned 1 foot away from the test terrace. The peak noise level off is presented. We make measured the noise floor (i.e. ambient noise levels of the board) to be 34 dBa, and when dependable at stock clocks, the vast majority of coolers do not emit noise levels above this forecast. Hence, we present combined graph with noise levels taken during our overclocked CPU test run.
Temperatures
Totally temperature charts are sorted with last load temperatures at the height.
Starting with Prime, the N-U14S TR4 sits basically exactly where expected, in between the smaller NH-U12S TR4, and the dual sports fan Stygian Rock'n'roll Pro TR4 with a max temp of 64.3 degrees, when our 1950X was overclocked to 4.0GHz. At stock, we see some much better temps at 37.8 degrees.
With Cinebench running a number of passes of the multicore benchmark to ensure that temperatures had levelled out we do see quite a cast of about 8 degrees, to 56.3 degrees when overclocking, and 32.3 at 3.4GHZ. Both ace sum temperature results came out the synoptic at 23.5 degrees.
Blenders BWM render besides revealed some promising results, with our 1950X overclocked 61.7 degrees, and at sprout 35.5 degrees. Our testing results fell basically in line with our expectations.
The larger ice chest and winnow sizes providing lower temps when compared to the smaller NH-U12S TR4, but the Dark Rock Pro 4 still sits in ordinal place, thanks to its significantly larger size, and dual fan configuration.
Clunky noise though was very mind-boggling. At 45 dBa, the N-U14S TR4 was almost just as quiet as the Dark Rock Pro 4 and sits in second situatio. There is, course, the low noise adapter included which wasn't exploited during examination, just this could always equal installed for symmetric quieter cognitive process – albeit it with slightly worsened cooling performance.
The NH-U14S TR4-SP3 is another strong production from Noctua, set to target the hardcore fancier interview wanting to cool one of AMD's high performance Threadripper coolers.
Even as with the smaller NH-U12S TR4 the installation was super painless, as the cooler is basically instal and ready to move on with all the required mounting hardware pre-installed, but as you would ask performance is better thanks to the increased physical heatsink size and bigger buff. The NH-U14S TR4-SP3 did a great job cooling the AMD TR 1950X both at hackneyed and overclocked, but as with the NH-U12S, IT's non the best option if you are preparation along overclocking heavily.
The NH-U14S TR4-SP3 is good cooler, and information technology is better appreciate for money than the littler NH-U12S model. It is presently only £1 more at Overclockers UK and you potty expect better fountain carrying into action with frown audible interference. In truth the only reason to consider the NH-U12S all over the NH-U14S TR4-SP3 would be because of space restrictions.
The Noctua NH-U14S TR4-SP3is currently available fromOverclockers United Kingdom of Great Britain and Northern Irelanfor £74.99 Iraqi National Congress. VATHERE.
Pros
- Bang-up cooling performance, with a elfin tractableness to overclock.
- Installation is very simple with only four screws to reduce.
- Sir David Alexander Cecil Low noise adapter and extra mounting for a fan enclosed.
Cons
- Alone compatible with the TR4 socket.
- Really solely supports low visibility memory.
KitGuru says: If space in your system International Relations and Security Network't a limitation there really is atomic number 102 reason not to get wind the NH-U14S TR4-SP3 over the NH-U12S. Even when compared to larger treble fan coolers like the Dark Rock In favor 4 it all the same performs great, simply with a such simpler form and climbing.
Become a Sponsor!
Does the Noctua Nh-u14s Tr4-sp3 Need a Second Fan
Source: https://www.kitguru.net/components/cooling/silas-newman/noctua-nh-u14s-tr4-sp3-review/all/1/
0 Komentar
Postar um comentário